모델명 : ETCR6000
원산지 : CHINA
브랜드 : ETCR
Function | Measurement of AC/DC current, leakage current |
Power Supply | 6F22,9V |
Test Mode | Clip-on CT, integral mode |
Clamp Size | Φ7mm |
Measurement Range | 0mA-60.0A AC/DC |
Resolution | 1mA AC/DC |
Accuracy | ±2%rdg±5dgt (23℃±5℃, below 75%rh) |
Display Mode | Four digits LCD display |
Dimension | LWH: 168mm×65mm×34mm |
LCD Dimension | 35mm×21.5mm; display domain: 32mm×15mm |
Sampling Rate | 2 times/s |
Frequency | AC: 45Hz-400Hz |
Polarity Indication | DC current auto identified and display“—” |
Test Position | Tested wire in the jaw center |
Range Shift | Automatically |
Line Voltage | AC600V |
RS232 Interface | Data stored in the memory of the meter via RS232 upload to PC |
Com-Configure | Baud rate:9600, data bit:8, stop bit:1 |
Data Memory | 99units, FULL blinks when the memory is full |
Reading Hold | DH indicating the reading is hold |
Out of Range | OL indicating the current is out of range |
Auto Power-off | 5 Minutes after power on, it will power off automatically to lower the power consumption |
Battery Voltage | Indicating the battery voltage is lower than 7.2V.Then the battery have to be changed |
Weight | 180g (including the battery) |
Working Current | 10mA |
Consumption | 10mW |
Working Temperature and Humidity | -10℃-50℃,below 80%rh |
Limit Temperature Error | -10℃-0℃ and 40℃-50℃, within 2%rdg |
Storage Temperature and Humidity | -10℃-60℃,below 70%rh |
Insulating Strength | AC2kV/rms (between the alloy of the clamp and the housing) |
Applicable safety rules | IEC1010-1, IEC1010-2-032, Pollution level 2, CAT Ⅲ(600V) |